期刊論文

 

  1. Jiang, B. C., Wang, C. C, Liu, H. C (2005) "LCD Surface Uniformity Defect Inspection Using ANOVA and EWMA Techniques," International Journal of Production Research, Vol. 43, No. 1, pp. 67-80(SCI).
  2. Jiang, B. C., Wang, C. C., and Chen, P. L (2004) "Logistic Regression Tree Applied to Classify PCB Golden Finger Defects," International Journal of Advanced Manufacturing Technology, Vol 24, pp. 496-502 (SCI).
  3. Wang. C. C and B. C. Jiang (2004) "Integral DOE and MANOVA Techniques for Classification Feature Selection: Using Solder Joint Defects as an Example," International Journal of Advanced Manufacturing Technology, (Accepted and Published online with DOI : 10.1007/s00170-004-2186-4), (SCI).
  4. Jen, C. H., B. C. Jiang and S. K. Fan (2004) A General Run-to-Run (R2R) Control Framework Using Self-Tuning Control for Multiple-Input Multiple-Output (MIMO) Processes, International Journal of Production Research, Vol. 42, No. 20, pp. 4249-4270 (SCI).
  5. Jaing, B. C., Wang, C. C., Liao, K. D and Lee, S. H (2004) "Study of Dynamic X-Ray Image Enhancement and Defects Classification," Journal of the Chinese Institute of Industrial Engineering, Vol.21, No.4, pp. 409-421(EI).
  6. Wang, C. C and B. C. Jiang (2004) "Design Feature Selection Index based on Overlap Region Applied to PCB Defects Classification," Images and Recognition , Vol. 10, No.2, pp. 40-51.
  7. Wang. C. C., B. C. Jiang , and Liu, C. W and Chen, P. L (2004) "The Research of PCB Impedance Model – A Case Study of Eight-Layer Board," Journal of Quality , Vol. 11, No.2, pp. 85-92.
  8. Jiang, B. C and T. J. Hsueh (2003) “Develop a Methodology for Evaluating a Hybrid 3D Noncontact Measurement System Capability”, Journal of the Chinese Institute of Industrial Engineering ,Vol.20, No.5, pp. 465-471, (EI).
  9. Jiang, B. C and C. H. Hsu (2003), “Development of a fuzzy decision model for manufacturability evaluation”, Journal of Intelligent Manufacturing, Vol. 14, No.2, pp. 169-181, (SCI) (Impact factor：0.610)
  10. 江行全，(2003) “6σ之核心精神--4P”，品質月刊，Vol. 60, pp. 60-61.
  11. Jiang, B. C ., Tasi, S. L. and Wang, C. C (2002) "Machine-Vision Based Grey Relational Theory Applied to IC Marking Inspection," IEEE Transactions on Semiconductor Manufacturing ,Vol. 15, No. 4, pp. 531-539,(SCI). (Impact factor：1.031)
  12. Jiang, B. C and J. Lan, (2002)”Group Technology Application for PCB Assembly,” International Journal of Industrial Engineering, Vol. 9, No. 4, pp. 399-407(SCI). (Impact factor：0.077)
  13. Jiang, B. C and S. D. Chiu (2002) “Form tolerance-based measurement points determination with CMM,” Journal of Intelligent Manufacturing, Vol. 13, No. 2, pp. 101-108, (SCI) (Impact factor：0.551)
  14. Fan, S. k., Jiang, B. C., Jen, C. H., and Wang, C. C (2002) "SISO Run-to-Run Feedback Controller using Triple EWMA Smoothing for Semiconductor Manufacturing Processes," International Journal of Production Research ,Vol. 40, No. 13, pp. pp. 3093-3120, (SCI). (Impact factor：0.600)
  15. Wang, C. C, Jiang, B. C and Lee, S. X (2002) "Applied SPC, DOE and RSM Techniques to Reduce the Defects of Aluminum Felly - A Case Study of Die Casting Process," Journal of Quality, Vol. 9, No. 2, pp. 1-17.
  16. 江行全，陳啟光 (2002) “建構顧客導向服務文化的觀念與作法”，研考雙月刊Vol. 26, pp. 93-101.
  17. Jiang, B. C, Wang, Y. M and Wang, C. C (2001) "Bootstrap Sampling Techniques Applied to PCB Golden Fingers Defect Classification Study," International Journal of Production Research, Vol. 39, No. 10, pp. 2215-2230, (SCI). (Impact factor：0.438)
  18. Jiang, B. C and T. C. Chen (2001) “Machine vision inspection for the protrusion rate of a diamond tool,” Journal of Manufacturing Systems, Vol. 20, No. 5, pp. 357-362, (SCI). (Impact factor：0.324)
  19. Jiang, B. C, Wang, Y. M and Wang, C. C. (2001) "The Evaluation of Artwork Dimensional Variance for PCB Manufacturing Process," Journal of Quality Vol. 8, No. 1, pp.85-105 [90年度最佳品質論文獎].
  20. Wang, C. C, and B. C. Jiang (2001) "PCB Solder Joints Defects Detection and Classification Using Machine Vision," International Journal of Industrial Engineering. Vol. 8, No.4, pp. 359-368, (SCI). (Impact factor：0.108)
  21. 張榮森、蔣東儒、江行全、林漢傑 (2001) “光學研磨操控參數之多目標優化--誤差調合實驗與類神精網路的應用”, 泰山職訓學報, Vol. 4, pp. 236-261.
  22. Tseng, Y. J. and B. C. Jiang (2000) “Evaluating Multiple Feature-Based Machining Methods Using an Activity-Based Cost Analysis Model,” International Journal of Advanced Manufacturing Technology,” Vol. 16, No. 9, pp.617-623, (SCI) (Impact factor：0.374)
  23. 張榮森、蔣東儒、江行全、林漢傑 (2000) “光學研磨機械運動參數最佳化 – 田口方法”, 泰山職訓學報, 第三期, pp. 124-138.
  24. Hsu, C. H. and B. C. Jiang (1999) “Fuzzy Multiple Attribute Decision Making Using a Simplified Centroid-based Arithmetic Process,” International Journal of Industrial Engineers, Vol. 6, No. 1, pp. 61-71, 1999, (SCI) (Impact factor0.158)
  25. 江行全、陳怡和 (1999) “供應商管理標竿之建立與分析-以台灣筆記型電腦產業為例”，品質學報，Vol. 6, No. 1, pp. 157-182.
  26. Hsu, C. H., B. C. Jiang and E. S. Lee (1999) “Fuzzy Neural Network Modeling for Product Development,” International Journal of Mathematical and Computer Modelling, Vol 29, pp. 71-81, (SCI) (Impact factor：0.303)
  27. Shiau, Y. and B. C. Jiang (1999) “Study of a Measurement Algorithm and the Measurement Loss in Machine Vision Metrology,” Journal of Manufacturing Systems, Vol. 18, No. 1, pp. 22-34, (SCI) (Impact factor：0.507)
  28. Chou, C. Y., B. C. Jiang, and J. C. Chen (1999) “A Study on the Process Capability Index Cp for Correlated Data,” Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, Vol. 23, No. 2, pp. 319-329.
  29. Jiang, B. C., Lin, T. T and Wang, C. C. (1999) "A Study of Using Machine Vision System for Surface Defects Classification," Journal of the Chinese Institute of Industrial Engineering Vol. 16, No. 4, pp. pp. 443-453,(EI).
  30. Chou, C. Y., P. H. Wang and B. C. Jiang (1999) “A Comparative Study on the Estimators of Standard Deviation in Statistical Process Control,” Journal of the Chinese Institute of Engineers, Vol. 22, No. 1, pp. 109-116.(SCI) (Impact factor：0.084)
  31. Wang, C. C, and B. C. Jiang (1998) "An Application of Logistic Regression Method for Semiconductor Process Analysis," Journal of Quality, Vol. 5, pp. pp. 91-105.
  32. 江行全、黃家弘、鄭元杰、王台平 (1998) “網際網路上利用模糊決策模式建構易製性評估系統”，科技管理學刊，Vol. 3, No. 2, pp. 155-175.
  33. 陳世賢、蕭堯仁、江行全 (1998) “可攜式機器視覺軟體系統架構之發展與建立”，中國工業工程學刊，Vol. 15, No. 6, pp. 559-571.
  34. Jiang, B. C. and S. J. Jiang (1998) “Machine Vision Based Inspection of Oil Seals,” Journal of Manufacturing Systems, Vol. 17, No. 3, pp. 159-166.(SCI)
  35. 徐正聲、江行全 (1998) ”光源模擬系統：應用於機器視覺系統中光源最佳位置之決定”，中國工業工程學刊, Vol. 15, No. 1, pp. 69-82.
  36. 江行全、郭錦茂、許績興 (1997) “以作業為基成本法對工件易製性之研究”，管理與系統，第三卷，第二期，pp. 233-263.
  37. Chou, C. Y., B. C. Jiang, and Y. R. Shiau (1997) “Implementing the Automated Visual Inspection in Quality Control System,” Journal of Industrial Technology, Vol. 14, No. 1, pp. 6-11, 1997.(SCI)
  38. Jiang, B. C., R. Duraisamy, G. Wiens and J T. Black (1997) “Robot Metrology Using Two Kinds of Measurement Equipment,” Journal of Intelligent Manufacturing, Vol. 8, No. 2, pp. 137-146. (SCI)
  39. 陳雲岫、張永弢、江行全 “利用統計模型對物件表面缺陷之分類研究—油封為例”，中國工業工程學刊，Vol. 13, No. 3, pp.283-294, 1996.
  40. 葉若春，江行全 “實施教學品保制度經驗談”，品質月刊，Vol. 32，pp. 24-26，1996.
  41. 江行全 “流程改照” ，品質月刊，Vol. 31，pp. 27-29，1995.
  42. Cheng, O. S. and B. C. Jiang, “A Study of Voice Controlled Robot Under Noisy Background,” Journal of Yun-Lin Institute of Technology, Vol. 4, pp. 105-115, 1995.
  43. Cheng, O. S. and B. C Jiang “An Integrated Safety and Manufacturing System,” International Journal of Human Factors in Manufacturing, Vol. 5, No. 3, pp. 303-324, 1995. (SCI)
  44. Shiau, Y. R. and B. C. Jiang, “A Methodology to Evaluate/Improve the Performance of a Machine Vision System,” International Journal of Production Research, Vol. 31, No. 6, pp. 1467-1478, 1993. (SCI)
  45. Wu, C. M., B. C. Jiang and C. H. Wu, “Using Neural Networks for Robot Positioning Control,” Robotics & Computer Integrated Manufacturing, Vol. 1, No. 3, pp. 153-168, 1993. (SCI)
  46. Wu, C. M., B. C. Jiang and Y. R. Shiau, “Controlling a Robot’s Position Using Neural Networks,” International Journal of Advanced Manufacturing Technology, Vol. 8, pp. 216-226, 1993. (SCI)
  47. Chen, C. C., B. C. Jiang and C. H. Wu, “Learning Optimization for CPN-Based Training in Robot Positioning Control,” Journal of Intelligent Manufacturing, Vol. 3, pp. 237-250, 1992. (SCI)
  48. Buchanan, T. L., K. N. Barker, J. T. Gibson, B. C. Jiang, and R. E. Pearson, “Illumination and Errors in Dispensing,” American Journal of Hospital Pharmacy, Vol. 48, pp. 2137-2145, 1991. (SCI)
  49. Jiang, B. C., D. W. H. Chen, J T. Black and J. N. Hool, “Taguchi-based Methodology in Determining/Optimizing Robot Process Capability,” IIE Transactions, Vol. 23, No. 2, pp. 169-184, 1991. (SCI)
  50. Shiau, Y. R. and B. C. Jiang, “Determine a Vision System’s 3D Coordinate Measurement Capability Using Taguchi Methods,” International Journal of Production Research, Vol. 29, pp. 1101-1122, 1991. (SCI)
  51. Chen, W. and B. C. Jiang, “3-D Camera Calibration Using Vanishing Point Concept,” Pattern Recognition, Vol. 24, No. 1, pp. 57-67, 1991. (SCI)
  52. Wu, C. M., J T. Black and B. C. Jiang, “Using Taguchi Methods to Determine/Optimize Robot Process Capability for Path Following,” Robotics and Computer Integrated Manufacturing, Vol. 8, No. 1, pp. 9-25, 1991. (SCI)
  53. Jiang, B. C., A. Y. H. Liou, N. Suresh, and O. S. H. Cheng, “An Evaluation of Machine Guarding Techniques for Robot Guarding,” Robotics, Vol. 7, No. 4, pp. 299-308, 1991. (SCI)
  54. Jiang, B. C., J. C. L. Chang, J T. Black, and L. Kutz, “Determine/Optimize An Industrial Robot’s Process Capability Using Taguchi Methods,” Transactions of the North American Manufacturing Research Institute of SME 1990, pp. 266-272, also as SME technical paper MS90-239.
  55. Black, J T. and B. C. Jiang, “Robot Process Capability Study Using Taguchi Methods,” Manufacturing Review, Vol. 3, No. 2, pp. 106-114, 1990. (SCI)
  56. Jiang, B. C., “Development of a Machine Vision System for Education,” Computers in Industrial Engineering, Vol. 18, No. 1, pp. 23-28, 1990. (SCI)
  57. Jiang. B. C. and R. Y. Shiau, “A Systematic Methodology for Determining/Optimizing a Machine Vision System’s Capability,” Machine Vision and Applications, Vol. 3, pp. 169-182, 1990. (SCI)
  58. Jiang, B. C. and O. S. H. Cheng, “Design for Robotic Cell Safety,” Journal of Manufacturing Systems, Vol. 9, No. 2, pp. 169-175, 1990. (SCI)
  59. Jiang, B. C. and O. S. H. Cheng, “A Procedure Analysis for Robot System Safety,” International Journal of Industrial Ergonomics, Vol. 6, pp. 95-117, 1990. (SCI)
  60. Jiang, B. C., J T. Black, J. N. Hool, and C. M. Wu, “Determining Robot Process Capability Using Taguchi Methods,” Journal of Robotics and Computer-Integrated Manufacturing, Vol. 6, No. 1, pp. 55-66, 1989. (SCI)
  61. Jiang, B. C., J T. Black, and R. Duraisamy, “A Review of Recent Developments in Robot Metrology,” Journal of Manufacturing Systems, Vol. 7, No. 4, pp. 339-357, 1988. (SCI)
  62. Aghazadeh, F. and B. C. Jiang, “Some Considerations in the Use of Isometric, Isoinertial and Isokinetic Strength Models for Predicting Lifting Capacity,” International Journal of Industrial Ergonomics, 2, pp. 101-110, 1988. (SCI)
  63. McCoy, M. A., J. J. Congleton, W. L. Johnston and B. C. Jiang, “The Role of Lifting Belts in Manual Lifting,” International Journal of Industrial Ergonomics, Vol. 2, pp. 259-266, 1988. (SCI)
  64. Jiang, B. C. and C. M. Wu, “A Biomechanical Modeling of the Body Weight Effects on a Manual Lifting Task,” International Journal of Production Research, Vol. 26, No. 2, pp. 219-235, 1988. (SCI)
  65. Jiang, B. C. and J T. Black, “Improving and Measuring Robot Process Capability,” CIM Review, Summer 1987, pp. 44-49, also in Handbook of Manufacturing Automation and Integration, Ed. J. Stark, Published by Auerbach Publishers, pp. 769-776.
  66. Jiang, B. C. and C. A. Gainer, “A Cause-and-Effect Analysis of Robot Accidents,” Journal of Occupational Accidents, Vol. 9, pp. 27-45, 1987(SCI)
  67. Jiang, B. C. and M. M. Ayoub, “Modeling of Maximum Acceptable Load of Lifting by Physical Factors,” Ergonomics, Vol. 30, No. 3, pp. 529-538, 1987. (SCI)
  68. Ayoub, M. M., B. C. Jiang, J. L. Smith, J. L. Selan and J. W. McDaniel, “Establishing Physical Criteria for Assigning Personnel to Air Force Jobs,” American Industrial Hygiene Association Journal, Vol. 48, No. 5, pp. 464-470, 1987. (SCI)
  69. Jiang, B. C. and A. Mital, “A Procedure for Redesigning/Evaluating of Manual Meterials Handling Tasks,” International Journal of Production Research, Vol. 24, No. 4, pp. 913-925, 1986. (SCI)
  70. Jiang, B. C., J. L. Smith and M. M. Ayoub, “Psychophysical Modeling for Combined Manual Materials Handling Activities,” Ergonomics, Vol. 29, No. 10, pp. 1173-1190, 1986. (SCI)
  71. Jiang, B. C., J. L. Smith, and M. M. Ayoub, “Psychophysical Modeling of Manual Materials Handling Capacities Using Isoinertial Strength Variables,” Human Factors, Vol. 28, No. 6, pp. 691-702, December 1986. (SCI)
  72. Smith, J. L. and B. C. Jiang, “A Manual Handling Study of Bag Lifting,” American Industrial Hygiene Association Journal, 45(8), pp. 505-508, August 1984. (SCI)

 

研討會論文：

 

1.      Jiang, B. C, Wang, C. C, Tasi, D. M and Lu, C. J (2004), “LCD Surface Defects Inspection Using Machine Vision," International Conference of the Fifth Asia-Pacific Conference on Industrial Engineering and Management Systems, December 12-15, 2004, Australia.

2.      江行全, 王建智, 曾紀鋼, 朱建政 (2004) "彩色視覺系統於晶圓表面瑕疵檢測之研究," 中國工業工程學會九十三年度年會暨學術研討會, 成功大學, 台南.

3.      江行全, 王建智, 張瑜珊 (2004) "建構動態AQL抽樣計劃-以IC測試廠為例," 中華民國品質學會40屆年會暨第10屆全國品質管理研討會, 國立高雄大學, 高雄.

4.      Jiang, B. C, Wang, C. C and Huang, W. H (2003) "Evaluation of the Effectiveness of Using Digital Cameras for Inspection," International Ergonomics Conference, May 7th - 9th, Munich.

5.      Jiang, B. C., Wang, C. C and Liu, H. C (2003) "LCD surface uniformity defect inspection study," The 8th Annual International Conference Industrial Engineering – Theory, Application and Practices, Las Vegas, Nevada.

6.      王建智, 江行全 (2003) "非常態多維資料之貝氏分類的探討 – 以銲錫瑕疵辨識為例," 中國工業工程學會九十二年度年會暨學術研討會, 建國技術學院, 彰化.

7.      王建智, 江行全, 劉志偉 (2003) "印刷電路板組抗模式之研究 – 以八層板為例," 中華民國品質學會39屆年會暨第9屆全國品質管理研討會, 中原大學, 中壢.

8.      江行全, 吳銘益, 任志宏, 王建智 (2003) "應用模糊類神經網路於批次製程控制之研究," 中國工業工程學會92年度年會暨學術研討會, 建國技術學院, 彰化.

9.      Wang, C. C and Jiang, B. C (2002), "The Strategy of Non-Normal Feature Variables for Defects Classification," International Conference of the Fourth Asia-Pacific Conference on Industrial Engineering and Management Systems, at the Grand Hotel, Taipei.

10.  Wang, C. C and Jiang, B. C (2002), "Feature Selection by Integral DOE and MANOVA Technique for Classification," International Conference of Industrial Engineering and Enterprise Management (IE&EM'2002), Tsinghua University, Beijing, P. R. China.

11.  Jiang, B. C and Wang, C. C (2002), "PCB Defects Inspection Using Machine Vision System," International Conference of Industrial Engineering and Enterprise Management (IE&EM'2002), Tsinghua University, Beijing, P. R. China.

12.  王建智、江行全, (2002), “DES中銅箔均勻度之製程參數設計與分析”, 第二屆台塑集團應用工程技術研討會, 台北縣, 明志技術學院.

13.  江行全、王建智、黃朝興, (2002), “具有自我相關之二維多變量管制圖之評估”, 中華民國品質學會38屆年會暨第8屆全國品質管理研討會, 台中。

14.  王建智, 江行全 (2001) "建構以重疊區域為基礎之特徵變數選取指標," 中國工業工程學會90年度年會, 高雄, 義守大學.

15.  江行全, 呂佳翰, 王建智 (2001) "建構多反應值最佳化區域之研究," 中華民國品質學會37屆年會暨第7屆全國品質管理研討會, 高雄, pp. 457-468.

16.  江行全, 李淑惠, 王建智 (2001) "動態X光影像即時強化分析," 中華民國第4屆可靠度與維護度技術研討會, 台北, pp. 133-142.

17.  江行全, 范書愷, 任志宏, 王建智 (2001) "多變量自適應控制應用於半導體R2R控制," 中國工業工程學會90年度年會, 高雄, 義守大學.

18.  Jiang, B. C, Wang, Y. M and Wang, C. C (2000) "Bootstrap Sampling Techniques Applied to PCB Golden Fingers Defect Classification," The Third Pacific Conference Industrial Engineering and Management Systems, Hong Kong.

19.  Wang, C. C., Bernard, C. Jiang and Y. H. Hsu (2000) "PCB Solder Joints Defects Detection and Classification Using Machine," The 5th Annual International Conference Industrial Engineering – Theory, Application and Practices, National Tsing Hsu University, Taiwan, R. O. C.

20.  王建智, 江行全, 許友南 (2000) "機器視覺為基之銲錫瑕疵檢測與分類," 第九屆南區統計研討會, 成功大學, 台南.

21.  江行全, 俞佳伶, 王建智 (2000) "印刷電路板製程中完稿底片尺寸漲縮變異之評估," 中華民國品質學會三十六屆年會暨第六屆全國品質管理研討會第十四屆亞洲品質研討會, 台北.

22.  李思賢, 王建智, 江行全 (2000) "鋁輪圈壓鑄機製程最佳化之研究," 第四屆中亞品質工程研討會, 台北科技大學, 台北.

23.  江行全, 陳佩玲, 王建智 (1999) "邏輯迴歸樹應用於PCB金手指之瑕疵分類," 中國工業工程學會八十八年度年會暨第七屆國科會工業工程學門專題研究計畫成果研討會, 清華大學, 新竹.

24.  Chi-Hsing Hsu, B. C. Jiang and E. S. Lee (1999) “Neuro-Fuzzy Ranking for New Product Development,” Proceedings of the Eighth International Fuzzy Systems Association World Congress, Vol. 1, pp. 166-170, August 17-20, Taipei, Taiwan.

25.  Jiang, B. C., and C. H. Hsu (1999) “FMADM Using a Simplified Centroid-based Arithmetic Process for an Integrated Manufacturability Management Model,” Proceedings of the International Conference on Management of Engineering and Technology, Vol. II, Session 19, pp. 1-7, Portland, OR, USA.

26.