SPECIALTY AREAS

Quality Engineering, Human Factors and Machine Vision in Manufacturing 　

EXPERIENCE

1993-Present Professor, Industrial Engineering and Management Department, Yuan Ze University (YZU)

2006-Present Vice President, YZU

2003-2006 Dean, Academic Affairs, YZU

1998-2002 Dean, College of Engineering , YZU

1998-2001 Advisory Board Member, Engineering Division, National Science Council , Taiwan

2004-2007 Coordinator, IE&M Program, Engineering Division, NSC, Taiwan

2001-2002 Editor-in-Chief, Journal of the Chinese Institute of Industrial Engineers

1992-Present Associate Editor, Journal of Manufacturing Systems

2000-Present Board Member, Asia Pacific Industrial Engineering and Management Society

1995-Present Board Member, Chinese Institute of Industrial Engineers

1976-1978 Second Lieutenant, Chinese Army of Taiwan

1978-1979 Production Engineer, Dalan Enterprises Co., Ltd, Taiwan

1979-1980 Teaching Assistant, Chung-Yuan University

1980-1984 Research Assistant and Instructor, Texas Tech University , Lubbock , TX

1984-1989 Assistant Professor, Industrial Engineering Dept., Auburn University , AL

1989-1991 Associate Professor, Industrial Engineering Dept., Auburn Unviersity, AL

1991-1993 Staff Engineer, IBM Hardware Lab, Poughkeepsie , NY

1993-1995 Consultant to the Philips Electronics Co., Chung-Li , Taiwan

1995-1995 Consultant to the Division of Electronics, ITRI, Taiwan

1994-1997 Chairman, Industrial Engineering Dept., YZU

1997-1998 Consultant to the President, YZU

1997-1999 Advisory Board Member, Ministry of Education, Taiwan

1996-2000 Editor, Journal of the Chinese Institute of Industrial Engineers

1999-2000 Secretary General, Chinese Institute of Industrial Engineers
　
PROFESSIONAL MEMBERSHIPS AND HONORS

Outstanding Research Project from National Science Council (NSC), Taiwan (2008-2011)

Outstanding Research Award from NSC, Taiwan (2004-2006)

Y. Z. Hsu Yuan-Ze Chair Professor Award, Far Eastern Y. Z. Hsu Science & Technology Memorial Foundation (2007)

Y. Z. Hsu Outstanding Research Professor Award, Far Eastern Y. Z. Hsu Science & Technology Memorial Foundation (2004)

Outstanding Industrial Engineering Medal, Chinese Institute of Industrial Engineers (2002)

Outstanding Paper Award, Chinese Institute of Industrial Engineers (2003)

Quality Paper Award, Chinese Quality Institute (2001)

University-Industry Cooperation Award, Ministry of Education (2000)

Research Award, NSC, Taiwan (1994-2000)

Outstanding Young Manufacturing Engineer Award, SME 1990

Outstanding Young Man of America , 1986

ALPHA PI MU Industrial Engineering Honor Society

TAU BETA PI Honorary Engineering Society

Professional Engineer, Alabama ( AL 16497)

Institute of Industrial Engineers (Senior Member)

Society of Manufacturing Engineers (SME)

Chinese Institute of Industrial Engineers (Board Member)

Chinese Institute of Quality Control (Member)

SPONSORED RESEARCH AND PROJECTS

“Six Sigma on Operation and Management Enhancement Project,” Chang Chun Petrochemical Co., Ltd.    (CCP), 2008-2009.

“Six Sigma on Operation and Management Enhancement Project,” CCP Co., 2003-2007.

“Development of Home Care-based Heart Attack Early Warning and Evaluation System for Aging,” Principal Investigation (Team of 5), National Science Council, Taiwan, 2004-2007. ( NSC 93-2213-E-155-050 )

“A Study of an Integration of a Machine Vision-based Inspection and Multivariable Real Time Control System for PCB Manufacturing Process,” 2002-2005. ( NSC93-2213-E-155-005 )

“Development of PCB Process Planning and Quality Monitoring System,” Principal Investigator (Team of 5), National Science Council, Taiwan, 1999-2002. (NSC 89-2213-E-155-004)

“A Study of Automatic Surface Defects Classification and Feedback Control System,” Principal Investigator, National Science Council, Taiwan, 200 1 -200 4 . (NSC 90-2218-E-155-017)

“Residential Environment and Health Monitoring for Aging,” Co-Principal Investigator, (Team of 7), National Science Council, Taiwan, 2001-2004.

“Intelligent Sensor Applied to DES Process Monitoring,” Manufacturing Technology Automation Enhancement Program, Ministry of Economics , Taiwan , 2004.

“Apply Machine Vision Technique to Automatic Boundary Detection for Badges Cutting Process,” How-Shun Enterprise Co., 2004.

“Apply Machine Vision Technique to Automatic Detection for TAB Surface Defects,” Gin Chan Electronics Corp., 2004.

“Enhancement of Surface Defects Image Using Florescence Chemicals,” ITRI, 2003.

“Integrate Machine Vision Inspection and Multivariable Real Time Control System for Shan Fong PCB Manufacturing Process,” Manufacturing Automation Technology Enhancement Program, Ministry of Economics, 2003.

“Develop a Remote Monitoring System for DES Manufacturing Process,” Manufacturing Automation Technology Enhancement Program, Ministry of Economics, 2002.

“Promote Industry-University Cooperation Program, Type B,” Manufacturing-Business Integration Program, Ministry of Education, 2001.

“2001 TQM Activities,” Co-Principal Investigator, National Tao Yuan Hospital , 4/01 – 11/01.

“Research on Industrial Engineering Curriculum Revision and Innovation Ability Improvement,” Co-Principal-Investigator, National Science Council, 2000-2003. (NSC 89-2519-S-155-001)

“Development of On-line Monitoring System for DES Process of PCB Manufacturing,” Principal Investigator, Boardtec Electronics Corp., 2/2000 – 9/2000.

“Enhance Industrial Technology Program—Develop a Machine Vision Surface Defects Inspection System for Flip Chip Package Process,” 2002-2003. (NSC91-2622-E-155-003-CC3).

“Development of Real-time X-Ray Inspection Image Analysis,” Co-Principal Investigator,” Defense Projects, National Science Council, 7/2000 – 12/2002. (NSC 89- 2623-7-014 -017)

“Study of Product Development Decision Model under Concurrent Engineering Environment,” Principal Investigator, National Science Council, Taiwan, 1998-2001. (NSC 87-2213-E-155-024)

“Development of Image Database Control System,” Co-Principal Investigator, National Space Program Office, 1997-1998.

“Development of Engineering Change Decision-Making System,” Principal Investigator, Defense Projects, National Science Council, Taiwan, 1997-1998. (NSC87-2623-D-155-008)

“TQM Project,” Principal Investigator, National Tao Yuan Hospital , 9/1998 - 5/1999.

“Develop TQM Benchmarking and Analysis for Taiwan 's Notebook Computer Industry – Supply Chain Management,” Principal Investigator, National Science Council, Taiwan, 1997-1999. (NSC 87-2213-E-155-016)

“Soft Computing Applied to Automatic Surface Defects Recognition and Classification,” Principal Investigator, National Science Council, Taiwan, 1998-1999. (NSC 88-2213-E-155-010)

“Research on Intelligent Manufacturability Design System,” Principal Investigator, Defense Projects, National Science Council, Taiwan, 1996-1997. (NSC86-2623-D-155-005)

“Optimizing Lighting Source and Location for Machine Vision,” Principal Investigator, National Science Council, Taiwan, 1996-1997. (NSC 86-2213-E-155-002)

“Rapid Prototyping on Machine Vision Inspection – Software Module and System Capability Evaluation,” Principal Investigator, National Science Council, Taiwan, 1995-1996. (NSC 85-2212-E-155-009)

“Development of Project Management and Tracking System,” Co-Principal Investigator, National Space Program Office, 1995-1996. (NSC84-NSPO(A)-PC-155-01)

“Computer Integrated Design/Planning/Manufacturing in Concurrent Engineering,” Principal Investigator, (team of 5), National Science Council, Taiwan, 1993-1996. (NSC 84-2221-E-155-001)

“Pilot Study on the Application of Statistical Methods on DRAM Testing Process,” Principal Investigator, Vanguard International Semiconductor, Inc., 5/95 – 12/95.

“Using CMM to Calibrate and Evaluate Noncontact 3D Measurement System,” Principal Investigator, Mechanical Division, Industrial Technology and Research Institute, 1994-1995. (CIT-83002)

“Quality Inspection and Analysis Monitoring System for Oil Seals,” Co-Principal Investigator, NAK Mao Shun Oil Seal Industrial Co., Ltd., 1993-1994.

“Computer Integrated CAD/CAPP/CAM Concurrent Engineering,” Co-Principal Investigator, National Science Council-Key Research Group, September 1993 - July 1995.

“ISO 9000 Certification Assistance,” Co-Principal Investigator, Asia Cement Co., July 1994 - June 1995.

“Robot Process Capability Study,” Principal Investigator, National Science Foundation Grant No. DMC-8519778, December 1986 - May 1989, U.S.$217,330.

“Design a Systematic Engineering Control for Robotic System Safety,” Principal Investigator, National Institute of Occupational Safety and Health, Grant No. 1R010H02230 -01A 1, and 1R010H02230-02, January 1988 - December 1989, U.S.$53,490.

“Design and Test a Telemetric Data Acquisition and Analysis System for Pocket Surf,” Principal Investigator, U.S. National Institute of Standards and Technology, Grant No. 60NANA1D1109, March 1991 - February 1992, U.S. $19,306.

“Manufacturing Systems Modeling Laboratory,” Co-Principal Investigator (with Dr. J Black), PREP Corp., For equipment, U.S. $20,000, 1987.

“Analysis, Design and Control of Integrated Manufacturing/ Production System,” Jointly with four others in IE Department, Advanced Manufacturing Technology Center, Auburn University, $72,000, Oct. 1985-Sep. 1986.

“Develop a Methodology for the Evaluation of Robotic Software Safety,” Principal Investigator, Auburn University Grant-In-Aid Program, No. 85-89, June 1985 - May 1986, U.S. $2,400.

“Machine Vision in Manufacturing,” Principal Investigator, One GRA, Advanced Manufacturing Technology Center, Auburn University, October 1988 - September 1989.

“Air Force Personnel Placement Based on Physical Work Capacity,” Participant , U.S. Air Force, September 1981 - August 1984, U.S. $700,000.

CONFERENCE PAPERS

1. Yang, W, H, and Jiang, B. C (2008) " Adaptive threshold technique based on statistical process control and wavelet transformation for detecting R peak in ECG signal ," The proceedings of the 3rd Asian International Workshop on Advanced Reliability Modeling (AIWARM), Oct.23 - 25, Taichung, Taiwan.

2. Wang, C. C., Chang, C. D and Jiang, B. C (2008) "Construct the Predictive Model for Multi-Diseases Using Multivariate Adaptive Regression Splines Method," The 9th Asia Pacific Industrial Engineering & Management Systems Conference Nusa Dua, Bali - Indonesia 3 - 5 December 2008 .

3. Yang, W, H, and Jiang, B. C (2008) " Automatic detection of atrial fibrillation using statistical rank order sequences and RR interval patterns in ECG signals," The 9th Asia Pacific Industrial Engineering & Management Systems Conference ,”Nusa Dua, Bali - Indonesia 3 - 5 December 2008 .

4. Wang, C. C., Jiang, B. C. and Chang, C. D (2008) "Analysis of hypertension and hyperlipidemia common cause using multi-feature selection method," The 38th International Conference on Computers and Industrial Engineering, Oct.31 - Nov.2, Beijing, China.

5. Wang, C. C., Jiang, B. C. Chou, Y. S and Chu, C. C (2008) "An Automatic Image Enhancement Technique for Low Contrast Image," The 9th Asia Pacific Industrial Engineering & Management Systems Conference Nusa Dua, Bali - Indonesia 3 - 5 December 2008 .

6. Wang, C. C., Jiang, B. C., Lin, J. Y. and Chu, C. C (2008) "A modified correlation coefficient based pattern matching for defect detection," The 38th International Conference on Computers and Industrial Engineering, Oct.31 - Nov.2, Beijing, China.

7. Yang, W, H, and Jiang, B. C (2008) "Combining forward-backward RR interval detector with arrhythmic beat classification in ECG signals,"   The 38th International Conference on Computers and Industrial Engineering, Oct.31 - Nov.2, Beijing, China.

8. Hung, C. H. and B. C. Jiang (2008), “Multi-scale Entropy Approach to Physiological Fatigue during Long-term Web Browsing,” The 2 nd International Conference on Applied Human Factors and Ergonomics 2008 , Las Vegas , USA .

9. Jiang, B. C. , C. C. Wang, Y. C. Chou and C. C. Chu （ 2007 ） , ”Rapidly Enhance Images for Electronic Products Inspection,” The 24 th Chinese Mechanical Engineers Conference , Chung-Li, Taiwan. (In Chinese)

10. Jiang, B. C. , Yang, W. H. and Chen J. D. (2007), “The Detection of Electrocardiogram R-Waves Based on the Concept of Slop and Continuous Runs,” Proceedings of The 13 th ISSAT International Conference on Reliability and Quality in Design , Seattle, Washington, USA, pp. 260-270.

11. Ho, J. H., C. C. Wang and B. C. Jiang (2007), “Develop a Six Sigma-based Multi-parameter Optimization—Using DVD Manufacturing Process as an Example,” The 1 st Symposium on IE&M Industry-University Cooperation , Taipei . (In Chinese)

12. Jiang, B. C. , Wang, C, C., Chen, H. J and Chu, C. C (2006), “Automatic Bubble Defect Inspection for Microwave Communication Substrates Using Multi-threshold Technique Based Co-Occurrence Matrix,” The 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice , Nagoya , Japan .

13. Yang , W. H and B. C . Jiang, (2006), “ The Detection of the QRS Complex Based on Wavelet Transform Using the MIT/BIH Arrhythmia Database ,” The 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice , Nagoya, Japan.

14. Jen, C. H., B. C . Jiang and C. C. Wang (2006), “An Improved Control Framework Using Robust Regression Estimation for Changes in a Dynamic Model,” The 11th Annual International Conference on Industrial Engineering Theory, Applications and Practice , Nagoya, Japan.

15. Jen, C. H., B. C . Jiang and Wang, C. C (2006), “The Process Adjustment Schemes Choice for Dealing with the Process Change in Different Dynamic Models,” The 36th International Conference on Computers and Industrial Engineering , Taiwan, R.O.C. (Received “ The PSC BEST PAPER AWARD” )

16. Jiang, B. C. , C. C. Wang, G. Y. Lin and C. C. Chu (2006), “Development of a Gray Level-based Information Correlation Method for Surface Defects Inspection of Electronic Products,” The 6 th AOI Symposium , Hsinchu, Taiwan. (The paper received the “Eeo-Tien Machine Vision Award”)

17. Jiang, B. C. , C. C. Wang and C. C. Chu (2005), “BGA Surface Defects Inspection and Classification Using Machine Vision”, The 6th Asia Pacific Industrial Engineering and Management Society Conference and the 8th Asia Pacific Division Meeting of the International Foundation of Production & Research , Makati City, Manila, Philippines.

18. Jen, C. H and B. C . Jiang (2005) “An Improved Framework of Quality C ontrol Using a Novel Combining Method for The Dynamic Process,” The 6th Asia Pacific Industrial Engineering and Management Society Conference and the 8th Asia Pacific Division Meeting of the International Foundation of Production & Research , Makati City, Manila, Philippines.

19. Jiang, B. C ., C. C. Wang and Y. N. Hsu (2005), “PCB Solder Joints Inspection with Background Remover Technique”, International Conference of The 3rd ANQ Congress & The 19th Asia Quality Symposium , Taipei , Taiwan .

20. Wang, C. C., B. C. Jiang and C. H. Chen (2005), “Development of a Impact Absorption Characteristics Curve for Carton Boxes,” The 2005 Chinese Industrial Engineers Annual Conference , Hsinchu , Taiwan . (In Chinese)

21. Jiang, B. C. , C. C. Wang, S. C. Pan and C. C. Chu (2005), “Apply Machine Vision to Inspect TAB Surface Defects,” The 2005 Chinese Industrial Engineers Annual Conference , Hsinchu , Taiwan . (In Chinese)

22.  Jiang, B. C. , C. C. Wang and C. C. Chu (2005), “Application of Machine Vision on Industrial Products,” The 5 th AOI Symposium , Hsinchu , Taiwan . (In Chinese)

23. Jiang, B. C. , C. C. Wang, D. M. Tsai and C. J. Lu (2004), “LCD Surface Defect Inspection Using Machine Vision,” Proceedings of IE&EM & IceCE'2004, & The 7 th Asia-Pacific Dividion Meeting of the International Foundation of Production Research , Gold Coast, Australia (Abstract on p. 130).

24. Wang, C. C., B. C. Jiang , G. G. Tseng and C. C. Chu (2004), “A Color Machine Vision System Applied to Wafer Surface Defects Inspection,” The 2004 Chinese Institute of Industrial Engineers Annual Conference , Tainan, Taiwan. (In Chinese)

25.  Jiang, B. C. , C. C. Wang and Y. S. Chang (2004), “Develop a Dynamic AQL Sampling Plan—Using an IC Testing Plant as an Example,” The 40 th Annual Conference of the Chinese Quality Institute , Kaohsiung , Taiwan. (In Chinese)

26.  Jiang, B. C. , C. C. Wang and W. H. Huang (2003), “Evaluation of the Effectiveness of Using Digital Cameras for Inspection,” International Ergonomics Conference , Munich , Germany .

27.  Jiang, B. C. , C. C. Wang and H. C. Liu (2003), “LCD Surface Uniformity Defect Inspection Study,” The 8th Annual International Conference Industrial Engineering – Theory, Application and Practices , Las Vegas, Nevada.

28.  Wang, C. C. and B. C. Jiang (2003), “Non-normal and Multi-scale Data Classification Using Bysian Technique, The 2003 Chinese Industrial Engineers Annual Conference , Changhua , Taiwan . (In Chinese)

29.  Wang, C. C., B. C. Jiang and Z. W. Liu (2003), “A Study on PCB Impedance Model-Using Eight Layer Board as an Example, The 39 th Annual Conference of Chinese Quality Institute , Chung-Li, Taiwan. (In Chinese)

30.  Jiang, B. C. , M. Y. Wu, J. H. Jen, C. C. Wang (2003), “Apply Neural Fuzzy Network for Batch Process Control,” The 2003 Chinese Institute of Industrial Engineers Annual Conference , Changhua, Taiwan. (In Chinese)

31.  Wang, C. C and B. C . Jiang (2002), “The Strategy of Non-Normal Feature Variables for Defects Classification,” International Conference of the Fourth Asia-Pacific Conference on Industrial Engineering and Management Systems , Taipei .

32.  Wang, C. C and B. C . Jiang (2002), “Feature Selection by Integral DOE and MANOVA Technique for Classification,” International Conference of Industrial Engineering and Enterprise Management (IE&EM'2002) , Tsinghua University , Beijing , P. R. China .

33.  Jiang, B. C. and C. C. Wang (2002), “PCB Defects Inspection Using Machine Vision System,” International Conference of Industrial Engineering and Enterprise Management (IE&EM'2002) , Tsinghua University , Beijing , P. R. China .

34.  Wang, C. C. and B. C. Jiang (2002), “Parameter Design and Analysis for PCB Film Uniformity in DES Process,” The 2 nd Taiwan Plastics Corp. Applied Engineering Technology Conference , Taipei , Taiwan . (In Chinese)

35.  Jiang, B. C. , C. C. Wang and C. S. Hwang (2002), “Evaluation of Self-correlated Multivariable 2D Control Charts,” The 38 th Chinese Quality Institute Annual Conference , Taichung, Taiwan. (In Chinese)

36.  Wang, C. C. and B. C. Jiang (2001), “Develop an Overlap Region-based Feature Extraction Index,” The 2001 Chinese Institute of Industrial Engineers Annual Conference , Kaohsiung, Taiwan. (In Chinese)

37.  Jiang, B. C. , J. H. Lu and C. C. Wang (2001), “Development of a Multi-response Optimal Operational Region,” The 37 th Chinese Quality Institute Annual Conference , pp. 457-468, Kaohsiung , Taiwan . (In Chinese)

38.  Jiang, B. C. , S. H. Lee and C. C. Lee (2001), “Analysis of Dynamic Real Time X-ray Images,” The 4th Reliability and Maintenance Conference , pp. 133-142, Taipei , Taiwan . (In Chinese)

39.  Jiang, B. C. , S. K. Fan, C. H. Jen and C. C. Wang (2000), “Multivariable Self Adaptive Control Applied to Semiconductor R2R Control,” The 2001 Chinese Institute Industrial Engineers Annual Conference, Kaohsiung , Taiwan. (In Chinese)

40.  Jiang, B. C. , Y. M. Wang and C. C. Wang (2000), “Bootstrap Sampling Techniques Applied to PCB Golden Fingers Defect Classification,” The Third Pacific Conference Industrial Engineering and Management Systems , Hong Kong .

41.  Wang, C. C., B. C. Jiang and Y. H. Hsu (2000), “PCB Solder Joints Defects Detection and Classification Using Machine,” The 5th Annual International Conference Industrial Engineering – Theory, Application and Practices , National Tsinghua University, Taiwan, R. O. C.

42.  Wang, C. C., B. C. Jiang and Y. N. Hsu (2000), “Machine Vision-based Solder Joints Inspection and Classification,” The 9th South Region Statistics Conference , Tainan , Taiwan . (In Chinese)

43. Jiang, B. C. , G. L. Yu and C. C. Wang (2000), “An Evaluation of PCB Film Dimensional Expansion/Shortage,” The 36th Chinese Quality Institute Annual Conference , Taipei , Taiwan . (In Chinese)

44.   Lee, S. C., C. C. Wang and B. C. Jiang (2000), “A Study of the Optimization of Aluminum Steel Casting Process,” The 4th Mid-Asia Quality Engineering Conference , Taipei , Taiwan . (In Chinese)

45.   Jiang, B. C. , P. L. Chen and C. C. Wang (1999), “Using Logic Regression Tree for PCB Golden Fingers Defects Classification,” The 1999 Chinese Institute of Industrial Engineering Annual Conference , Hsinchu , Taiwan . (In Chinese)

46.   Chi-Hsing Hsu, B. C. Jiang and E. S. Lee (1999), “Neuro-Fuzzy Ranking for New Product Development,” Proceedings of the Eighth International Fuzzy Systems Association World Congress , Vol. 1, pp. 166-170, Taipei, Taiwan.

47.  Jiang, B. C. , and C. H. Hsu (1999), “FMADM Using a Simplified Centroid-based Arithmetic Process for an Integrated Manufacturability Management Model,” Proceedings of the International Conference on Management of Engineering and Technology , Vol. II, Session 19, pp. 1-7, Portland, OR, USA.

48.  Wang, C. C. and B. C. Jiang (1999), “Bysian Method Applied to Machine Vision Inspection and Classification,” The 34th Quality Institute Annual Conference , Chung-Li , Taiwan . (In Chinese)

49.  Chen, E. H. and B. C. Jiang (1998) , “Development and Analysis of Suppliers Management Benchmarking Method—Using Taiwanese Notebook Computer Industry as an Example,” The 34th Chinese Quality Institute Annual Conference , Chung-Li , Taiwan . (In Chinese)

50.  Hsu, C. H. and B. C . Jiang (1997), “Estimating Reliability for a Missile Weapon System by Fuzzy Sets and Neural Network,” Proceeding of the 2nd R.O.C. Symp. on R. & M. , Chung-Li , Taiwan , pp. 331-317. (NSC86-2623-D-155-005)

51.  G. S. Hsu and B. C. Jiang (1997), “A Study of Applying Fuzzy Logic Decision on Concurrent Product Development,” The 5th Defense Management Theory and Practice Conference , pp. 557-567. (NSC86-223-D155-005) (In Chinese)

52.  Jiang, B. C. , G. S. Hsu, Y. J. Cheng, T. P. Wang and S. B. Wu (1997), “ Evaluation of Part Manufacturability Using Activity-based Costing and Fuzzy Multi-criteria Decision Model,” The 1997 Chinese Institute of Industrial Engineers Annual Conference , pp. 1-6, Kaohsiung, Taiwan. (NSC86-2623-D-155-005) (In Chinese)

53. Shiau, Y. R., B. C . Jiang and C. M. Wu (1996), “A Heuristic Algorithm and the Measurement Loss for Line Segment Measurement Using MVS,” The 4th International Conference on Automation Technology Proceedings , pp. 583-589, Hsinchu , Taiwan .

54.  Jiang, B. C. and S. J. Jiang (1996), “Automatic Inspection of Oil Seals,” Proceedings of the Japan-USA Symposium on Flexible Automation , Boston , Massachusetts , USA , pp. 967-970. (NSC-84-2212-E-155-018).

55.  Chiu, S. D. and B. C . Jiang (1996), “Feature-based Measurement Points Determination with CMM,” Proceedings of the 4th International Conference on Automation Technology , Hsinchu , Taiwan .

56.  G. S. Hsu and B. C. Jiang (1996), “A Study of Using Activity-based Costing to Support Concurrent Engineering Environment,” The 4th Defense Management Theory and Practice Conference , pp. 1259-1268, Taipei , Taiwan . (In Chinese)

57.  Jiang, S. J., B. C. Jiang and D. M. Tasi (1996), “Applying Machine Vision on Oil Seal Inspection,” The 8th Automation Technology Conference , pp. 873-879, Chung-Li , Taiwan . (In Chinese)

58.  Wu, C. M., Y. R. Shiau and B. C . Jiang (1995), “Regression Analysis for Calibrating the Machine Vision System,” The 9th Technological and Professional Education Conference , pp. 309-318, Yunlin , Taiwan .

59.  Shiau, Y. R. and B. C . J iang (1995), “Determining an Acceptable Resolution of a MVS by Inspection Quality Loss,” Proceedings of the Automation '95 . Chung-Li , Taiwan , ROC, pp. 244-251.

60.  Chou, C. Y., B. C . Jiang and Y. R. Shiau (1995), “Implementing the Automated Visual Inspection for Products' Quality,” Proceedings of the Automation '95 , Chung-Li, Taiwan, ROC, pp. 849-856, July 1995.

61.  Wu, C. M., B. C . Jiang and Y. R. Shiau (1995), “A Neural-Networks Scheme for Robot Positioning Control,” Proceedings of the 1995 International IEEE/IAS Conference on Industrial Automation and Control, Emerging Technologies , Taipei, Taiwan, ROC, pp. 224-230.

62.  Chen, H. Y., G. J. Wiens and B. C . Jiang (1994), “Correlation Between Kinematic and Dynamic Robot Performance Measures,” Proceedings for the 1994 Japan-USA Symposium on Flexible Manufacturing , Vol. 2, Kobe, Japan, pp. 439-446.

63.  Jiang, B. C. , R. Duraisamy, G. J. Wiens, and J T. Black (1994), “Artifact Testing of a Robot Using Taguchi Methods,” Proceedings for the 1994 Japan-USA Symposium on Flexible Manufacturing , Vol. 2, Kobe, Japan, pp. 435-438.

64.  Wu, C. M., Y. R. Shiau and B. C . Jiang (1992), “Neural Networks Approach for Robot Positioning Control,” CIIE National Conference Proceedings , Kaohsiung, Taiwan, pp. 348-353.

65.  Shiau, Y. R., C. M. Wu and B. C . Jiang (1992), “Taguchi Methods Applied on a Machine Vision System,” CIIE National Conference Proceedings , Kaohsiung , Taiwan , pp. 180-185.

66.   Wu, C. M., B. C . Jiang and Y. R. Shiau (1992), “MTL-CPN Control for Robot Positioning,” Proceedings of the Second International Conference on Automation Technology , Taipei, Taiwan, Vol. 3, pp. 15-22.

67.  Wu, C. M., B. C . Jiang and C. H. Wu (1991), “Using Neural Networks for Robot Positioning Control,” Intelligent Engineering Systems through Artificial Neural Networks, Proceedings of the Artificial Neural Networks in Engineering (ANNIE '91) Conference , Edited by C. H. Dagli, S. R. T. Kumara, and Y. C. Shin, St. Louis, MO, pp. 795-800.

68.  Jiang, B. C. and Otto S. H. Cheng (1990), “Design of a Safe Robotic Cell,” Robots 14 Conference Proceedings , Detroit , MI , pp, 5-27 to 5-41. Also as a SME Technical Paper MS90-684.

69.  Jiang, B. C. and Y. R. Shiau (1990), “How Well a Low-Cost Machine Vision System Can Measure,” Vision '90 Conference Proceedings , Detroit, MI, pp. 1-43 to 1-55. Also as a SME Technical Paper MS90-567.

70.Jiang, B. C. and J T. Black (1990), “A Review of Robot Metrology,” Proceedings of the First International Conference on Automation Technology , Taipei , Taiwan , pp. 89-98.

71.  Jiang, B. C. and J T. Black (1990), “Taguchi Methods-Based Robot Process Capability,” Proceedings of the 1990 Japan-USA Symposium on Flexible Automation , Kyoto, Japan, pp. 1007-1010.

72.  Wu, C. M., J T. Black and B. C . Jiang (1990), “Use Taguchi Methods to Determine and Optimize A Robot's Process Capability for Commanded Path,” Proceedings of Manufacturing 90 , Vol. IV, Atlanta, GA, pp. 187-192.

73.  Chen, C. S., B. C . Jiang and C. H. Wu (1990), “Evaluation of Neural Networks Training Efficiency,” (Abstract Only) Presented at the First Workshop on Neural Networks , Auburn , AL .

74.  Wu, C. M. and B. C . Jiang (1990), “Controlling Robot Process Capability Using Neural Networks,” (Abstract Only) Presented at the First Workshop on Neural Networks , Auburn , AL .

75.  Jiang, B. C. and J T. Black (1990), “Summary Report on Robot Process Capability,” Proceedings of NSF Design and Manufacturing Systems Conference , Tempe , AZ , pp, 325-333.

76.  Jiang, B. C. , W. H. Chen, J T. Black and J. N. Hool (1989), “Taguchi Methods-Based Robot Metrology,” Robots 13 Conference Proceedings , Gaithersburg , MD , p p. 1.45 -1.59. Also as SME technical paper MS89-287.

77.  Jiang, B. C. (1989), “Experience in the Development of a Vision System for Manufacturing Education,” Robots 13 Conference Proceedings , Gaithersburg , MD , p p. 15.1 -15.10. Also as SME Technical Paper MS89-323.

78.  Jiang, B. C. , D. W. H. Chen, J T. Black and J. N. Hool (1989), “Determine/Optimize Robot Process Capability Using Taguchi Methods,” Proceedings of the NSF DMCE Manufacturing Grantees Conference , Berkeley, CA, pp. 21-30.

79.  Jiang, B. C. and J T. Black (1988), “Determination/Improvement of Robot Process Capability,” Proceedings of the 11th Triennial World Congress of the International Measurement Confederation (IMEKO)-Sensors , Houston , TX , pp. 355-365.

80.  Jiang, B. C. , J T. Black and R. Duraisamy (1988), “A Critical Review of Gaging Robot Process Capability,” Proceedings of the Robots 12/Vision 88 , Detroit , MI , p p. 10.1 -10.11. Also as SME technical paper MS88-323.

81.  Jiang, B. C. and J T. Black (1987), “Robot Process Capability Study,” Proceedings of the 14th Conference on Production Research and Technology , Ann Arbor, MI, pp. 205-212 (NSF Grantees Conference).

82..  Jiang, B. C. and W. Chen (1987), “Camera Calibration Technique Using Vanishing Point Concept,” Proceedings of the IEEE 1987 International Conference on System, Man and Cybernetics , Washington, D. C., pp. 640-644.

83.  Jiang, B. C. (1987), “A Systematic Procedure in Designing a Robotic Workplace,” Proceeding of the IXth ICPR , Cincinnati , OH , pp. 2707-2713.

84.  Teng, S. H. and B. C . Jiang (1987), “Application of Vision System in Manufacturing Parts Alignment,” Proceedings of the IXth ICPR , Cincinnati , OH , pp. 443-449.

85.  Jiang, B. C. (1987), “Safety Considerations for Programming Industrial Robot,” Proceedings of the Annual International Industrial Ergonomics and Safety Conference , Miami , FL , pp. 465-472.

86.Gainer, A. C. and B. C . Jiang (1987), “A Cause-and-Effect Analysis of Industrial Robot Accidents From Four Countries,” Robots 11 Conference Proceedings , Chicago , IL , pp. 9-1 to 9-11.

87.  Jiang, B. C. and J T. Black (1986), “Robot Process Capability – An Overview,” In the Proceedings of the IEEE 1986 International Conference on Systems, Man and Cybernetics , Atlanta, GA, pp. 319-323.

88.  Calisto, G. W., B. C . Jiang and S. H. Cheng (1986), “A Checklist for Carpal Tunnel Syndrome,” In the Proceedings of the Human Factors Society 30th Annual Meeting , Dayton , OH , pp. 1438-1442.

89.  Jiang, B. C. (1986), “Robot Safety – Users' Guidelines,” Proceedings of the Annual International Industrial Ergonomics and Safety Conference , Louisville , KY , pp. 1041-1049.

90.  Jiang, B. C. (1986), “A Systematic Procedure for Robot Safety,” In the Proceedings of the 25th Annual ASSE Professional Development Conference , New Orleans , pp. 245-255(Invited).

91.  Jiang, B. C. , M. M. Ayoub, J. L. Smith, J. L. Selan and J. W. McDaniel (1986), “Establishing a Physical Criterion for Assigning Personnel to U.S. Air Force Jobs,” In Proceedings of the Annual International Industrial Engineering Conference 1986 , Dallas, TX, pp. 386-391.

92.  Liou, Y. H., B. C . Jiang and J. L. Smith (1985), “Dynamic Biomechanical Model for Lifting Activities: A Microcomputer Application,” in the Proceedings of Human Factors Society 29th Annual Conference , Baltimore , MD , pp. 310-314.

93.  Jiang, B. C. and A. Mital (1985), “Job Design/Redesign Procedure for Manual Materials Handling Tasks,” In the Proceedings of Human Factors Society 29th Annual Conference , pp. 1002-1006.

94.  Jiang, B. C. and J. L. Smith (1985), “The Comparison of Stressfulness of Manual Materials Handling Activities,” Proceedings of 2nd Mid-Central Ergonomics/Human Factors Conference , Purdue University , pp. 577-589.

95.  Jiang, B. C. and J. L. Smith (1985), “Effective Strength Testing for Screening Manual Materials Handlers,” Abstract Only. The 1985 American Industrial Hygiene Conference , Las Vegas , NV , pp. 175-176.

96. Ayoub, M. M., J. L. Selan and B. C . Jiang (1984) , “From Work Design to Employee Training: Issues in Manual Materials Handling,” In Proceedings of 1984 Annual International Industrial Engineering Conference , Chicago , pp. 159-263.